- Description
- Specification
- Dimensions
- Send Inquiry
Series: W/P/WP - windlasses
This set of windlasses are specially constructed for intensive use. They have a robust construction with their band brakes lined with a ferrodo friction material.
Standard features
- Orbit type hydraulic motor
- Heavy duty worm gearbox or planetary/ worm gear combination
- Free-fall clutch
- IP 56 TENV cast iron 400 V AC / 3 phases / 50 Hz non-braking motor with torque knob
- Band brake
- Horizontal cast iron warping head
- Suitable for 10 – 28 mm DIN / Studlink chain sizes from 12.5 – 28 mm
- Three layer 2-component conservation according ISO 12944 category C4-High, colour RAL 5010
General options for winches
- Drum divider flange
- Grooved drum
- Drum guard
- Pressure roller
- Spindle limit switch
- Encoder + Spindle limit switch
- Claw clutch
- Friction clutch
- Slack wire switch
- Pneumatic spindle limit switch
- Manual band brake
- Hydraulic operated band brake
- Pendant remote control
- Pneumatic control valve
- Spooling gear
- Additional rope anchor
- Slip ring
- Manual emergency crank (on electric motor)
| Speed at top layer: | 10.0 m/min |
| Pressure drop: | 95.0 bar |
| Flow: | 55 l/min |
| Mass: | 360 kg |
| Holding force: | 10000 kg |
| WLL pulling first layer: | 3600 kg |
*For more storage, higher / lower speed or change any parameter, please contact with us
| Dimension D1: | 280 mm |
| Dimension L1: | 1300.0 mm |
| Dimension L2: | 210.0 mm |
| Dimension L3: | 560 mm |
| Chain size DIN: | 20 |
| Chain size stud: | 19 mm |