Hydraulic windlass w 600 h

Hydraulic windlass w 600 h

Speed at top layer 10.0 m/min.

Hydraulic windlass w 600 h Technical drawning of Hydraulic windlass w 600 h
  • Description
  • Specification
  • Dimensions
  • Send Inquiry

W/P/WP series - windlasses

This set of windlasses are specially constructed for intensive use. They have a robust construction with their band brakes lined with a ferrodo friction material.


Standard features

  • Orbit type hydraulic motor
  • Free-fall clutch
  • Band brake
  • Heavy duty worm gearbox or planetary/ worm gear combination
  • IP 56 TENV cast iron 400 V AC / 3 phases / 50 Hz non-braking motor with torque knob
  • Suitable for 10 – 28 mm DIN / Studlink chain sizes from 12.5 – 28 mm
  • Horizontal cast iron warping head
  • Three layer 2-component conservation according ISO 12944 category C4-High, colour RAL 5010

General options for winches

  • Drum divider flange
  • Grooved drum
  • Drum guard
  • Pressure roller
  • Spindle limit switch
  • Encoder + Spindle limit switch
  • Claw clutch
  • Friction clutch
  • Slack wire switch
  • Pneumatic spindle limit switch
  • Manual band brake
  • Hydraulic operated band brake
  • Pendant remote control
  • Pneumatic control valve
  • Spooling gear
  • Additional rope anchor
  • Slip ring
  • Manual emergency crank (on electric motor)
See more
Speed at top layer:10.0 m/min
Pressure drop:100.0 bar
Flow:60 l/min
Mass:500 kg
Holding force:6000 kg
WLL pulling first layer:2000 kg

*For more storage, higher / lower speed or change any parameter, please contact with us

Dimension D1:195 mm
Dimension L1:750.0 mm
Dimension L2:180.0 mm
Dimension L3:460 mm
Chain size DIN:1618
Chain size stud:16 mm