Hydraulic winch YR000H

Hydraulic winch
Power supply Hydraulic
WLL lifting first layer 0 kg
WLL lifting top layer 0 kg
Speed at 1st layer 0.0 m/min
Speed at top layer 0.0 m/min
Drum capacity on 1st layer 0 m
Drum capacity on top layer 0 m

Product specification YR000H

Power supply Hydraulic
Numbers of layers 0
Drum capacity on 1st layer 0 m
Drum capacity on top layer 0 m
Gearbox type messages.gear_type_worm_planetary_combination

*For more storage, higher / lower speed or change any parameter, please contact with us

Product dimensions YR000H

Umbilical / hose reels / transponder winches 

Hose reel, umbilical or transponder winches are chiefly built for special purposes. Their drive can be: electric, hydraulic or pneumatic. They can be executed with a self-braking wormgear or planetary gear, depending on load specification. Hose reels are used to reel hoses for fresh water supply, fuel supply and hydraulic oil or to reel electrical power supply cables. 

Umbilical winches are used to reel hoses, signal cables, coax or even fibre optic cables. Most of them are equipped with slip rings and/or rotating swivels. Transponder winches used for powered transponders are chiefly applied with electrical signal cables and have, in most cases, an electrical slip ring mounted.
Winches can be supplied complete with an A-frame if required.

Industrial Winch™ provides systems for all applications. Our systems can be found on the following type of constructions: offshore heavy lift vessels, offshore semi-subs, diving support vessels, research vessels, cable and pipe laying vessels and others.


Standard features

  • Radial piston air or hydraulic motors
  • Self-braking wormgear, helical bevel, planetary or slew gear transmissions
  • Heavy duty construction
  • IP 56 TENV 400 V AC / 3 phases / 50 Hz braked motors (or 440/3/60)
  • Double layer 2-component conservation according ISO 12944 category C2-Low, colour RAL 5010