- Description
- Specification
- Dimensions
- Send Inquiry
Series: AW/PW - accomodation and pilot ladder winches
AW winches are designed to position and hold accommodation and ship-to-shore ladders and ladders between vessels and offshore installations. Constructed in accordance with SOLAS requirements for international shipping, the range features a dynamically and statically self-braking wormgear and emergency hand crank. Each type may be configured for single or twin rope operation and powered by means of an electric or pneumatic motor. PW winches are used to lower and lift the pilot ladder on board of seagoing vessels, EMCE has one standard design, PW 550, that has been supplied to several dredging vessel fl eet owners. We have also supplied custom-built designs. Please ask about the available options.
Standard features
- Self-braking wormgear transmission for the AW series
- Planetary gear for PW 550
- SOLAS compliance
- IP 56 TENV motor protection for the AW ES series
- IP 66 TENV with standstill heating for the PW 550
- Rotary vane, gear type air or motor for the AW LS series
- Steel drum (not grooved) with one or two cable fixing point(s) at flange
- Two drum supports
- Emergency hand crank for the AW series only
- Double layer 2-component conservation, colour RAL 5010
- 13 meter pilot ladder with 32 fl at steps, 4 spreaders and 4 rubber steps for PW 550
- Pneumatic versions with hand control valve
- IP 66 spindle limit switch for PW 550
- FEM / ISO class: T3-L3-M4
Note: For pneumatic winches is the speed on the first layer the average speed. The speed at the top layer is at unloaded conditions.
General options for winches
- Drum divider flange
- Grooved drum
- Drum guard
- Pressure roller
- Spindle limit switch
- Encoder + Spindle limit switch
- Claw clutch
- Friction clutch
- Slack wire switch
- Pneumatic spindle limit switch
- Manual band brake
- Hydraulic operated band brake
- Pendant remote control
- Pneumatic control valve
- Spooling gear
- Additional rope anchor
- Slip ring
- Manual emergency crank (on electric motor)
WLL lifting top layer: | 1000 kg |
Speed [m/min]: | 6.5 m/min |
Number of layers: | 3 |
Drum capacity top layer: | 40 m |
Pressure drop: | 6.0 bar |
Flow: | 100 l/min |
Mass: | 195 kg |
Rope diameter: | 10 mm |
Holding force: | 3000 kg |
*For more storage, higher / lower speed or change any parameter, please contact with us
Dimension D1: | 159 mm |
Dimension D2: | 320 mm |
Dimension L1: | 250.0 mm |
Dimension L2: | 155.0 mm |
Dimension L3: | 710 mm |
Dimension L4: | 260 mm |
Dimension L5: | 470 mm |
Dimension L6: | 200 mm |
Dimension L7: | 20 mm |
Dimension H1: | 15.0 mm |
Dimension H2: | 220 mm |
Dimension H3: | 150 mm |
Dimension H4: | 522.0 mm |
Dimension W1: | 519.0 mm |
Dimension W2: | 154 mm |
Dimension W3: | 410 mm |
Dimension W4: | 360 mm |
Hole diameter: | 17.0 mm |