Hydraulic manriding winch mr30flh

Speed at top layer 43.0 m/min, WLL 1st layer 200 kg.

Hydraulic manriding winch mr30flh
  • Description
  • Specification
  • Send Inquiry

Series: MR FL - manriding winches 

These winches are dedicated personnel lifting winches supplied with full material traceability. They have passed EC testing for these applications, - both winches and their technical files are in compliance with the requirements of the EC Machinery Directives.

MR 30 FL winches are specially designed for personnel lifting in which a safety harness or a boatswain's chair is used on fixed installations with a total WLL of 150 kg. MR 30 FGL winches have passed EC testing for these applications.
Both winches can be supplied with a Lloyds Register of Shipping (LRS), ABS or DNV Design Appraisal Certificate.

MR 50 FL and MR 60 FL are constructed to be used with assemblies using a platform, basket, carrier (MR 50 FL - with a total WLL of 500 kg and MR 60 FL - 1000 kg).

Standard features

  • Orbit hydraulic motor
  • Helical shaft mounted gearbox, life lubricated with synthetic oil
  • Limit switch
  • Pneumatic gearmotor
  • Slack wire switch
  • Two drum supports
  • Caliper primary brake 180% of WLL
  • Helical grooved steel drum
  • Overload protection device
  • Air service unit (pneumatic models only)
  • Main air emergency stop valve
  • UK HSE compliance
  • Full material traceability (3.1 - EN 10204) on load-bearing parts
  • Local proportional control with biased control valve (pneumatic models only)
  • Local proportional control with biased control valve (MR 30 FLP/FLV only)
  • Mufflers (on MR 30), 50 and 60 FLG
  • Drum guard
  • Automatic band brake as secondary drum acting brake 180% of WLL
  • Prepared for emergency lowering system
  • FEM / ISO class: T4-L3-M5
  • Three layer 2-component conservation according ISO 12944 category C4-High, colour RAL 1023
  • Operating conditions –20°C to 50°C

General options for winches

  • Drum divider flange
  • Grooved drum
  • Drum guard
  • Pressure roller
  • Spindle limit switch
  • Encoder + Spindle limit switch
  • Claw clutch
  • Friction clutch
  • Slack wire switch
  • Pneumatic spindle limit switch
  • Manual band brake
  • Hydraulic operated band brake
  • Pendant remote control
  • Pneumatic control valve
  • Spooling gear
  • Additional rope anchor
  • Slip ring
  • Manual emergency crank (on electric motor)
See more
WLL 1st layer [kg]:200 kg
WLL lifting top layer:150 kg
Speed at top layer:43.0 m/min
Number of layers:5
Drum capacity top layer:125 m
Pressure drop:70.0 bar
Flow:1500 l/min
Rope diameter:10 mm

*For more storage, higher / lower speed or change any parameter, please contact with us