Hydraulic capstan c 110 h

Speed 8.0 m/min, WLL 1st layer 700 kg.

Hydraulic capstan c 110 h Technical drawning of Hydraulic capstan c 110 h
  • Description
  • Specification
  • Dimensions
  • Send Inquiry

Series: C - Capstans

Planetary capstans


Equipped with a cast iron capstan head mounted on a heavy duty planetary gearbox. Its drive is set in a watertight tube frame providing extra protection. Pneumatic drives are also available - on request. Capstans up to 15 tons can be offered upon request.

Wormgear capstans


Provided with self-braking worm gear drives powered by electric, hydraulic or pneumatic motors (on-deck or below-deck types are available). An on-deck drive is equipped with a waterproof motor for intermittent use. A below-deck drive is equipped with a dripwater-proof motor and a mounting plate with an extra self-aligning bearing for high static loads. Pneumatic drives are also available - on request.

Standard features

  • Vertical cast iron warping head according to ISO 6482
  • Heavy duty wormgear or planetary gearbox
  • Three layer 2-component conservation according ISO 12944 category C4-High, colour RAL 5010
  • IP 54 braked motor 400 VAC / 3-phases / 50 Hz for planetary capstans
  • Orbit or radial piston type hydraulic motor
  • IP 56 TENV cast iron 400 V AC / 3-phase / 50 Hz non-braked motor for on-deck wormgear capstans
  • Single speed and one direction only (electric capstans only)
  • IP 54 400 V AC / 3 phases / 50 Hz non-braked motor for under-deck wormgear capstans

General options for winches

  • Drum divider flange
  • Grooved drum
  • Drum guard
  • Pressure roller
  • Spindle limit switch
  • Encoder + Spindle limit switch
  • Claw clutch
  • Friction clutch
  • Slack wire switch
  • Pneumatic spindle limit switch
  • Manual band brake
  • Hydraulic operated band brake
  • Pendant remote control
  • Pneumatic control valve
  • Spooling gear
  • Additional rope anchor
  • Slip ring
  • Manual emergency crank (on electric motor)
See more
WLL 1st layer [kg]:700 kg
Speed [m/min]:8.0 m/min
Pressure drop:105.0 bar
Flow:15 l/min
Mass:70 kg
Rope diameter:22 mm
Neck diameter:140 mm

*For more storage, higher / lower speed or change any parameter, please contact with us

Dimension D1:140 mm
Dimension D2:280 mm
Dimension D3:390 mm
Dimension D4:230 mm
Dimension H1:10.0 mm
Dimension H2:130 mm
Dimension H3:350 mm
Dimension H4:209.0 mm
Dimension H5:10.0 mm